Decos Capping Trim Black
Our panels all have a tongue and grooved side edge and a hollow construction so if you have any exposed edges this trim is used to provide a neat finish to the edge.
If you are fitting panels only part way up a wall Capping Trim can be used on the top of wall panels as a form of dado .
Capping Trim can also be used with our ceiling panels as an alternative to Coving Trim around the edges of a ceiling (see our fitting trims page for more information on this). This is a 2-part trims so installation is simplicity itself.
Trim Size – 2700mm x 33mm x 12mm
Decos Corner Trim Black 102
Corner Trim 102 is used to join panels in a corner and can be used on both internal and external corners. This is a two part trim so one section acts as a “backing plate” onto which the other section clips once the panels are in place.
This trims is slightly bigger than the Corner Trims 030 and is recommended for use with our Neptune range of panels. The larger size can be an advantage if you are not confident of your cutting as it will hide more of the gap.
Trim Size – 2700mm x 30mm x 30mm
Decos Angle Trim Black
Angle Trim can be used to cover up exposed corners.
It is usually used on external corners such as the one shown in the photo where it is used around a window reveal but it can also be used on internal corners if required.
It is just over 12mm in size so it is very neat and provides a smaller visible profile than our other corner trims.
This trim is simply stuck in place using our adhesive in dry areas or using silicone in wet areas such as showers.
Trim Size – 2440mm x 1.25mm x 12.5mm
