Chrome Capping Trim
Our panels all have a tongue and grooved side edge and a hollow construction so if you have any exposed edges this trim is used to provide a neat finish to the edge.
If you are fitting panels only part way up a wall Capping Trim can be used on the top of wall panels as a form of dado .
Capping Trim can also be used with our ceiling panels as an alternative to Coving Trim around the edges of a ceiling (see our fitting trims page for more information on this).
The trim is made from white plastic and has the chrome effect on the two visible surfaces (the inside is white as is the back surface)
Trim Size – 2700mm x 33mm x 12mm
Chrome External Angle Trim
External Angle Trim can be used to cover up exposed corners.
It is usually used on external corners such as the one shown in the photo where it is used around a window reveal.
It is just over 25mm in size so it is very neat and provides a smaller visible profile. It is made from white plastic with a chrome effect on the two external surfaces (the internal surfaces are white)
This trim is simply stuck in place using our adhesive in dry areas or using silicone in wet areas such as showers.
Trim Size – 2700mm x 25mm x 25mm
Chrome Internal Angle Trim
Angle Trim can be used to cover up internal corners – such as inside a shower cubicle where the walls meet each other.
This trim is simply stuck in place using our adhesive in dry areas or using silicone in wet areas such as showers.
Trim Size – 2700mm x 28mm x 28mm
