shower cubicle

HOMEPAGE :: PRODUCT RANGE :: APPLICATIONS :: INSTALLATION :: TECHNICAL :: CONTACT US :: VIEW CART

Shower Wall Panelling Shower Cubicles Shower Cubicle Panels & Trims Cubicle Fig. 1 Cubicle Fig. 2 Cubicle Fig. 3 Wet Room Panels Full Product List

Installing Wall Panels With Shower Cubicles

Over time the grout used with tiles in a shower cubicle can start to deteriorate. It can become dirty or, even worse, mould can start to appear. Wall panels can provide a solution to this problem by doing away with grout altogether. Panelling can be fitted inside the cubicle over the existing tiles (providing they are clean, dry and sound).

The following diagram shows a typical scenario where there is a 750mm cubicle be fitted into the corner of the room. The panels can be run to the top of the cubicle or they can be run up past the top of the cubicle to the ceiling. The join between the panels and the frame can be sealed with silicone as can the join between the panels in the corner. If the panels are to be run to the ceiling, as per the diagram below, you will need to purchase a length of capping trim to cover the exposed edges of the panels where they protrude above the enclosure frame.

shower cubicle with wall panels

If you are slightly concerned about cutting the panels accurately you can use trims in the corner and the edges - see the following page for more info: Cubicle Fig. 3